SmallRig Cage+Monitor Mount for Sony Alpha 7 IV/A7S III/A 1/A7R IV/A7R V Camera

Description: Week DealsShop by Camerafor Sonyfor Nikonfor FUJIFILMfor Canonfor PanasonicPower SolutionCamera TripodPhotography LightLens AccessoriesPhone AccessoriesStabilizer AccessoriesBrand OutletPackage includes: 1、Camera Cage 3667B：https://www.ebay.com/itm/125092995509 2、Camera Monitor Mount：https://www.ebay.com/itm/126758596363About this item-Camera Cage 3667B Improved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The Cable Clamp for HDMI 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IVAll-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4"-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154. About this item---HawkLock H21 Quick Release Monitor Holder Quick Release Camera Monitor Mount: The SmallRig HawkLock H21 Quick Release Monitor Holder 4487 is composed of a monitor mount with a NATO clamp and a NATO rail. Press the button to flare the pins, then slide the NATO rail into the groove. Release the button to securely lock the NATO rail into the monitor mount, making your shooting more efficient and time-saving360° Swivel & 160° Tilt: The camera monitor holder allows for a 360° swivel sideways and a 160° tilt with free-stop at any position and angle you prefer. Additionally, the horizontal axis tightness can be adjusted with the included hex wrench, and the tilt axis tightness can be quickly adjusted via the knob to better accommodate equipment of varying weightsFor 5" or 7" Monitors: Designed to hold your monitor on top of the camera or other mounting systems via a NATO clamp, the SmallRig field monitor mount 4487 features a 1/4"-20 screw on top for securing 5" or 7" camera monitors, LED lights, or microphones.Anti-Twist Design: The camera monitor holder bulid in bouncy locating pins on the top to futher secure monitors for Ninja V/ V+, and silicone pad to prevent the monitor from scratching and twisting.Long-lasting & Reliable: Made of aluminum alloy, HawkLock H21 monitor holder is sturdy and robust for long-term use. It has a maximum dynamic load capacity of 2.5 kg and supports most camera monitors available on the market. Tested rigorously, the camera monitor bracket can endure 10,000 tilt adjustments without easily loosening. From the BrandOn Dec 6, 2024 at 13:07:15 PST, seller added the following information:

Price: 98.82 USD

Location: Perth Amboy, New Jersey

End Time: 2025-01-04T07:36:11.000Z

Shipping Cost: 0 USD