SmallRig A7 IV Cage& Hand Strap for Sony Alpha 7 IV/A7S III/Alpha 1/A7R IV/A7R V

Description: item includes: Camera Cage 3667B : https://www.ebay.com/itm/294552856586 Hand Strap PAC2456B :https://www.ebay.com/itm/293856513844 About CageImproved Design: 1. A cold shoe is added to the upper right corner of the cage to facilitate the installation of accessories such as Microphone 3468 and LED Video light 3286; 2. Two 1/4"-20 threaded holes with a spacing of 18mm are added at the bottom, which is compatible with SmallRig Quick Release Plate for Arca 3154. A QD hole is added at the bottom, which is compatible with QD quick release shoulder straps and other accessories.For Sony A7R V/A7 IV/A7S III/A1/A7R IV: SmallRig Cage 3667 is designed for Sony A7R V, A7 IV, A7S III, A1, A7R IV to facilitate low-angle shots and protect the camera while offering a wide range of accessory mounts. NOTE: The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV because it will block the synchro terminal interface when used on the Alpha 7R V.Multiple Mounting Points: The cage has multiple 1/4"-20 holes and 3/8"-16 positioning holes for ARRI, which can attach accessories such as the upper handle 3765, the side handle 2093, and the monitor stand 2903B. There are 2 built-in cold shoe interfaces, which can install microphones, fill lights and other equipment; the QD hole at the bottom is compatible with QD shoulder straps. Holes are reserved on both sides and bottom of the cage to attach Wrist Strap PAC2456 and Shoulder Strap PSC2428.Three-Point Locking: A positioning pin is added at the bottom of the cage, and the 1/4"-20 screw and the left M2.5 screw form a three-point locking to make the camera stable. Adjust the direction of the left locking slider to adapt to different models, [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IVAll-Round Protection: Built-in all-round rubber gasket to prevent scratches. With the cage installed, the camera interface, dials, buttons and changing batteries are not affected. The opening and closing wrench design is added to the position of the battery compartment, which fits the curve of the fuselage more, solves the problem of placing the little finger, and enhances the grip of the fuselage.Built-in Quick Release Plate: The bottom quick release plate for Arca has added 1/4"-20 holes with a spacing of 18mm, which is compatible for DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, and can also be adapted to DJI RS 2 / RSC 2 stabilizer mounting board (riser plate) and SmallRig Quick Release Plate for Arca 3154.SmallRig Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV 3667B is designed to provide accessory mounts and protect camera. It lock camera via one bottom locating pin, one 1/4"-20 screw and the one M2.5 screw on the left side. The side lock adapters need to be adjusted the installation direction for fitting different camera types, printed with “A7 IV”is for Alpha 7 IV and Alpha 7R V while printed with “A7S III/A1”is for Alpha 7S III / Alpha 1 / Alpha 7R IV. Built-in all-round protective spacers prevent the camera from being scratched. The cage gives access to interfaces, dials, buttons or battery door. There is a spindle spanner at the battery compartment which fits camera curve and leave room for little finger for comfortable grip. 1/4"-20 threaded holes, ARRI 3/8" -16 locating holes and cold shoe mounts support top handle 2165C, side handle 2093, monitor mount 2903, microphones, LED lights, monitors, etc. Bottom OD socket support QD shoulder strap. Arca-Swiss quick release plate at the bottom is compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro, the quick release plate (riser plate) of DJI RS 2/RSC 2 stabilizer for stabilizer shooting, and Arca-Swiss quick release plate 3154. Optional HDMI Cable Clamp 3000 works with Alpha 7R V / Alpha 7 IV / Alpha 7S III to protect interfaces and ensure stable signal transmission during filming. Holes on the sides and bottom of the cage allow attaching such accessories as hand strap PAC2456 and shoulder strap PSC2428. Besides, the cage comes with a built-in magnetic spanner that facilitate disassembly and assembly. Designer: Tracy JoyNotes:1. After fixing the 1/4"-20 screw at the bottom of the cage, remove the anti-deflection pin from the staging hole in the battery compartment position and secure it to the corresponding position.2. To use the side lock adapter, please remove the split ring on the left side of the camera first.3. HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras and will interfere with the synchroterminal interface when used on Alpha 7R V camera. Compatibility: Sony Alpha 7R VSony Alpha 7 IVSony Alpha 7S IIISony Alpha 1Sony Alpha 7R IV In the Box: 1 x Cage Product Dimensions: 146 x 107.6 x 64.5mmPackage Dimensions: 165 x 155 x 85mmProduct Weight: 180g±5gPackage Weight: 286g±5gMaterial(s): Aluminum Alloy, Stainless Steel, Silicone About Wrist Strap: Universal Compatibility: Compatible with camera cage or external side handgrip with strap slot on both upper and lower sides and its width no less than 12mm,or L-Bracket with strap slot on the lower side (a camera split ring is required when using with the L-Bracket, and the split ring is not included)Secures Your Camera: Enhance shooting stability and grips the hand and wrist to effectively protect your camera from dropping.The surface of the hand strap is made of PU material, which makes the strap wear-resisting and durableBreathable and Comfortable: Filled with high-quality EVA material, covered with microfiber fabric, will bring better shock-proof experience and excellent effect of moisture absorption and perspiration, to keep hands dry and comfortableQuick Adjustable:It could be quickly tightened without loose with a gentle pull.The strap adjusts to fit hands of all sizes and snaps on easily.Note: 1. Safety load: 12.5kg. 2. Do not expose to the sun. 3. Wash by hand and dry in a cool and ventilated place.Key Features: Universal hand strap, compatible with camera cage and external side handgrip with strap slot on both upper and lower sides and its width no less than 12mm.Enhance shooting stability and effectively protect your camera from dropping.The strap supports quick adjustment of tightness.Moisture-absorbing, and comfortable touch feeling. Compatibility: Compatible with camera cage or external side handgrip with strap slot on both upper and lower sides and its width no less than 12mmCompatible with L-Bracket with strap slot on the lower side and its width no less than 12mm (a camera split ring is required when using with the L-Bracket, and the split ring is not included) Note: Safety load: 12.5kgDo not expose to the sun.Wash by hand and dry in a cool and ventilated place. Featured Products

Price: 71.01 USD

Location: Rowland Heights, California

End Time: 2023-09-26T10:25:56.000Z

Shipping Cost: 0 USD