Description: Saturn to DB15 Controller Adapter The Saturn to DB15 Controller Adapter does just what it sounds like, adapts Sega Saturn controllers to the DB15 controller format used by the NEO-GEO AES*, MVS, and popular superguns like the HAS (Home Arcade System) and Minigun Supergun. * The Neo Geo AES controller ports are not standard DB15 and are set deeper into the console than a normal DB15 port. In order for this adapter to work with the AES you need to use an extension cable. Features: Full user customizable button mapping. Buttons 1-6 and coin can be remapped to any of the face and shoulder buttons. This also allows for mapping duplicates of the same button.Auto fire with 6 speed options from 30hz down to 6hzStatus LED to help navigate button remapping and auto fire configuration modes.All settings save in the internal EEPROM of the micro-controller so they persist after power cycling the adapter. Button Remapping and Autofire instructions for all adapters. To enter button remapping mode hold any 2 face buttons and START simultaniously for 3 seconds. Once in remapping mode press each button the corresponding number of times to achieve the desired output based on the list below.Button 1 = 1 pressButton 2 = 2 pressesButton 3 = 3 pressesButton 4 = 4 pressesButton 5 = 5 pressesButton 6 = 6 pressesCoin = 7 pressesN/A = 8 presses Press Start to exit remapping mode. To enter auto fire programming mode hold any 1 face button and START simultaniously for 3 seconds. Once in auto fire programming mode press each button that you want to set as auto fire the number of times that corresponds to the desired speed in the list below.~30hz = 1 press~20hz = 2 presses~15hz = 3 presses~12hz = 4 presses~7.5hz = 5 presses~6hz = 6 presses Press Start to exit auto fire mode. HAS Mode: The button mapping modes are controlled using the same combinations as the HAS supergun. This was done to make these adapters convenient for people familiar with the HAS system to use, but if you are using one of these adapters with a HAS supergun, you will find that the button mapping modes conflict with one another. As a workaround I have added a way to disable button remapping and auto fire. You can toggle this mode on or off by pressing and holding L + R + Start for 5 seconds. When you disable button remapping and auto fire the LED will light up solid for a second and then shut off. When you enable button remapping and auto fire the LED will flash rapidly for a second then shut off. You can toggle between each mode at any time. The mode settings are saved in the EEPROM and will persist after a power cycle. Housing Options: The housing is 3D printed in PLA. It is available in 2 color options. Black with silver text, or white with black text. The default color is black silver, so if you want white and black please send me a message when you order.
Price: 35.2 USD
Location: Benton, Arkansas
End Time: 2024-11-26T02:49:37.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Arthrimus
