Rubicon Express 2.5 Rear Shocks (2) for 2020-2023 Jeep Gladiator 1-2.5” LIFT

Description: Free ShippingTop QualitySent With a Tracking No. Fitment Guide: Note: Designed to fit 1-2.5" lift JEEP Gladiator 2020-2023 Specifications: 20-Current Gladiator JT Models with 1-2.5" lift 2.5 body outer diameter with full bore piston to maximize damping capability 6061-T6 Impact forged aluminum bodies for increased strength and lower shock temperatures Hard anodized body finish for durability and reduced friction Tuned specific to Rubicon Express spring rates to maximize ride quality and suspension travel 17-4 Stainless steel chrome plated shaft for strength and corrosion resistance 3/4" OD shaft for reduced seal friction and gas force Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation Redundant seal package Hand made in the USA by Walker Evans Extended Length: 27.5" Compressed Length: 17.5" Description: The new Rubicon Express 2.5" Monotube shock design delivers superior performance for your Jeep in all types of terrain. The foundation of the shock starts with a hard-anodized thick wall impact forging. The forging gives the shock body added strength, while the aluminum allows quick heat dissipation. The hard anodizing not only gives a great appearance but reduces friction and bore wear. An added benefit is rust issues are eliminated that steel bodies are prone to. This new lineup features 17-4 stainless steel precipitation hardened shafts that are chrome plated for maximum corrosion and abrasion resistance. Thick wall steel sleeves are housed inside the cross-linked urethane bushings for extreme durability. Each part number is specifically tuned to match the vehicle application. Rubicon Express 2.5 Rear Shocks (2) for 2020-2023 Jeep Gladiator 1-2.5” LIFTShippingReturnsContactShippingReturnsContact We offer FREE shipping on all orders in the continental United States! Your order will be processed within 1 business day of receiving payment (Monday-Friday) and you should expect to receive an active tracking number 1-2 days after being shipped. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or possible exchange. Buyer is responsible for return shipping. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging! If you have any questions or concerns regarding an order or a listing, please feel free to send us a message through eBay! We typically respond within 24 hours. Fitment Guide: Note: Designed to fit 1-2.5" lift JEEP ---Gladiator 2020-2023 Specifications: ---20-Current Gladiator JT ---Models with 1-2.5" lift ---2.5 body outer diameter with full bore piston to maximize damping capability ---6061-T6 Impact forged aluminum bodies for increased strength and lower shock temperatures ---Hard anodized body finish for durability and reduced friction ---Tuned specific to Rubicon Express spring rates to maximize ride quality and suspension travel ---17-4 Stainless steel chrome plated shaft for strength and corrosion resistance ---3/4" OD shaft for reduced seal friction and gas force ---Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation ---Redundant seal package ---Hand made in the USA by Walker Evans Extended Length: 27.5" Compressed Length: 17.5" Description: The new Rubicon Express 2.5" Monotube shock design delivers superior performance for your Jeep in all types of terrain. The foundation of the shock starts with a hard-anodized thick wall impact forging. The forging gives the shock body added strength, while the aluminum allows quick heat dissipation. The hard anodizing not only gives a great appearance but reduces friction and bore wear. An added benefit is rust issues are eliminated that steel bodies are prone to. This new lineup features 17-4 stainless steel precipitation hardened shafts that are chrome plated for maximum corrosion and abrasion resistance. Thick wall steel sleeves are housed inside the cross-linked urethane bushings for extreme durability. Each part number is specifically tuned to match the vehicle application. Rubicon Express 2.5 Rear Shocks (2) for 2020-2023 Jeep Gladiator 1-2.5” LIFT Fitment Guide: Note: Designed to fit 1-2.5" lift JEEP Gladiator 2020-2023 Specifications: 20-Current Gladiator JT Models with 1-2.5" lift 2.5 body outer diameter with full bore piston to maximize damping capability 6061-T6 Impact forged aluminum bodies for increased strength and lower shock temperatures Hard anodized body finish for durability and reduced friction Tuned specific to Rubicon Express spring rates to maximize ride quality and suspension travel 17-4 Stainless steel chrome plated shaft for strength and corrosion resistance 3/4" OD shaft for reduced seal friction and gas force Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation Redundant seal package Hand made in the USA by Walker Evans Extended Length: 27.5" Compressed Length: 17.5" Description: The new Rubicon Express 2.5" Monotube shock design delivers superior performance for your Jeep in all types of terrain. The foundation of the shock starts with a hard-anodized thick wall impact forging. The forging gives the shock body added strength, while the aluminum allows quick heat dissipation. The hard anodizing not only gives a great appearance but reduces friction and bore wear. An added benefit is rust issues are eliminated that steel bodies are prone to. This new lineup features 17-4 stainless steel precipitation hardened shafts that are chrome plated for maximum corrosion and abrasion resistance. Thick wall steel sleeves are housed inside the cross-linked urethane bushings for extreme durability. Each part number is specifically tuned to match the vehicle application. Shipping We offer FREE shipping on all orders in the continental United States! Your order will be processed within 1 business day of receiving payment (Monday-Friday) and you should expect to receive an active tracking number 1-2 days after being shipped. In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or possible exchange. Buyer is responsible for return shipping. You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging!Contact If you have any questions or concerns regarding an order or a listing, please feel free to send us a message through eBay! We typically respond within 24 hours. Fitment Guide: Note: Designed to fit 1-2.5" lift JEEP Gladiator 2020-2023 Specifications: 20-Current Gladiator JT Models with 1-2.5" lift 2.5 body outer diameter with full bore piston to maximize damping capability 6061-T6 Impact forged aluminum bodies for increased strength and lower shock temperatures Hard anodized body finish for durability and reduced friction Tuned specific to Rubicon Express spring rates to maximize ride quality and suspension travel 17-4 Stainless steel chrome plated shaft for strength and corrosion resistance 3/4" OD shaft for reduced seal friction and gas force Internal floating piston separates nitrogen and oil to improve damping response and eliminate cavitation Redundant seal package Hand made in the USA by Walker Evans Extended Length: 27.5" Compressed Length: 17.5" Description: The new Rubicon Express 2.5" Monotube shock design delivers superior performance for your Jeep in all types of terrain. The foundation of the shock starts with a hard-anodized thick wall impact forging. The forging gives the shock body added strength, while the aluminum allows quick heat dissipation. The hard anodizing not only gives a great appearance but reduces friction and bore wear. An added benefit is rust issues are eliminated that steel bodies are prone to. This new lineup features 17-4 stainless steel precipitation hardened shafts that are chrome plated for maximum corrosion and abrasion resistance. Thick wall steel sleeves are housed inside the cross-linked urethane bushings for extreme durability. Each part number is specifically tuned to match the vehicle application.

Price: 144 USD

Location: North Branch, Minnesota

End Time: 2024-09-07T04:40:00.000Z

Shipping Cost: 0 USD