Racer-3-angle-Valve-Job-Seat-Cutter-Kit-Carbide-Honda-Suzuki-Kawasaki-Yamaha-3AC

Description: Valve Seat cutter Kit Carbide Tipped 3 Angles Cut Performance Head 30 Degree, 45 Degree,60 Degree Racing Kart, Clone, Predator, Hemi, Honda, Briggs,BSP most Motorcycles or engines if they havea 4.5, 5, 5.5, 6,7 mm , 1/4" mm valve stem, If you are building or rebuilding your own small engines, either for performanceor just a quality rebuild, this gives you control of cutting your own valve seats you can do astandard 45 degree seat or even 3 angleseat with this set... you can move the sealing surface on the seat for best performance...this is ONLY if you have 4.5, 5, 5.5, 6,7 mm , 1/4" valve stemsthis kit comes with the following. 1st Top Angle & 2nd Base Angel Cutters Valve seat cutters: 22 mm 30,45 degree23 mm 30,45 degree24 mm 30,45 degree25 mm 30,45 degree26 mm 30,45 degree27 mm 30,45 degree28 mm 30,45 degree29 mm 30,45 degree30 mm 30,45 degree32 mm 30,45 degree34 mm 30,45 degree 3rd Throat Angle Cutters 23 mm 60 degree25 mm 60 degree28 mm 60 degree30 mm 60 degree32 mm 60 degree Valve Guide Stems : 4.5, 5, 5.5, 6,7 mm , 1/4" Valve Guide Reamers H.S.S 4.5, 5, 5.5, 6,7 mm , 1/4" 2 x T - HANDEL 2 x DRIVE RODS WOODEN CASE FAST & ECONOMICAL VALVE SEAT RESTORATION SYSTEM Please know this is for hobbyist & professionals builders Racers who build their own engines,or small volume high performance engine builders, If you are building your own racing Kart, Trike, or mini bike,or any engine with 4.5,5,5.5,or 7 mm valve guilds, then this will put you well ahead of those who do not have the abilityto have a 3 angle or multi angle valve job. or if you don't want to wait weeks to have it done from some outside "machine shop"...even do a few valve jobs for friends and this will pay for itself MANY times over. The seat cutters in this kit have performed very well for hobbyist & professionals even for me many times...This is a great option vs buying a $150 head that is race prepped...This is NOT rocket science, I personally usually get a very good sealing surface with just the cutters.I use the cutters and then lap in the valves. It takes me 10 to 20 min to get the cuts and the sealI want on a small performance engine. I mark the seat with a black sharpee to see where I will cut, I do this on both valve seats..then I lap in the valves with lapping compound until I get a nice grey consistent seat... clean very well and you are done... First to cut 45 degree sealing surface to get the valve where they want it depth wise. then go back and do the blend or flow cutswith the 60 degree and the 30... This is a great tool to learn and experiment with what works with your situation withoutdepending on others and their opinions. Note: depending on your valve size it is possible to do a 4 or 5 step or/angle valve job with these cutters. I can honestly sayI have never gotten a better valve seat from an outside machine shop than the ones I CUT on my own with this set.If you race a class that does not allow porting then a good valve seat/ valve Job is the best thing you can do forincreased performance. NOTE: if you race a "BOX STOCK" class you can bet the winning engines have a good valve job, If you Race a "claimer class" this is a zero cost performance boost, that costs nothing but a few minutes on the bench. This is a MUST have Tool. We can also produce VALVE SEAT CUTTERS as per costumer requirement. Feel Free To Ask Any Question. Track Page Views WithAuctiva's Counter

Price: 294.99 USD

Location: DELHI, DELHI

End Time: 2024-11-25T01:01:39.000Z

Shipping Cost: 14.99 USD