KERUI Wireless Driveway Alarm Outdoor Motion Sensor Outdoor Home Security Alarm

Description: 新建网页 1 Function ① PIR sensor will pick up any movement 20ft in front of it, and send a signal up to 500ft (in open area) back to the receiver which chimes. The sensor is a passive infrared motion sensor that detects heat movement, 90 degree viewing radius from dead center, can be adjusted by 2 window covers in the kit. With the durable plastic lens and weather resistant casing (waterproof IPV4), it is suitable for monitoring specific outdoor areas such as driveway, front door, porch, shed, garage, etc. ② The receiver has an ON/OFF switch and a volume control. 16 alert sounds are selectable and each melody will play for a set duration, some repeat and sound off for 20s, some are as simple as doorbell rings and only last for a few seconds. Duration is dependent on the choice of the melody you desired. 5 volume levels up to 100 dB (MUTE included), along with the LED light indicator flashing, fantastic to give a visual alert that someone is coming up your door or the driveway. ④ Wireless sensor runs on 2* AA batteries (Not Included) for up to one year, portable receiver can be either plugged in using included AC adaptor or can run on 3* AA batteries (Not Included). Plugging in any standard outlet and using the batteries as a backup, even if there are no batteries in the receiver, it will retain the paring and alarm tone choices if unplugged or power fails. 1 sensor and 1 receiver are already pre-programmed so it is ready to work right out of the box. ③ Holds up to 8 sensors with 2 assigned to 4 zones, and any time a sensor that's triggered activates the zone it's paired with lights up (RED-1,GREEN-2,BLUE-3,PURPLE-4). Can even choose a different ringtone for each sensor, so that when a sensor is set off, you can easily tell where the motion has taken place by the LED color or a specific ringtone. Set your entrance of your store to zone 1, and set backdoor to zone 2, if motion is detected at the back, the GREEN LED lights and sound goes off. ⑤ The recommended position is mounting the sensor 3-4ft above the ground at the entrance to your driveway and pointed straight out towards your house. The mounting plate has 2 screw holes for mounting, screwed it right to the fence post, tree, stake in ground and more. This will decrease or eliminate false alarms from small animals, and avoid unwanted alarms from nearby traffic. You can minimize the effect by selecting the detecting range and adjust the aiming angle to cover the desired area. 　 The item come with KERUI LOGO , please know that . 　 Technical parameters Alarm Panel Power: DC 5V / 3pcs * AAA Battery (not include) Detection Distance：<100m (open area) Alarm sound: 110dB Working Humidity：<80% Waterproof Motion Detector Power: DC 3V 2 * AA Batteries (not include) Detection Distance：<6-12m (open area) Detection angle : 90 degrees Outdoor usage : waterproof ( IPV4) Installation height : 1-2m (vehicle) , 2-4m (human) 　 Reliable Range - Communication range of up to 100m/328ft (the distance from the sensors to the receiver/alarm/chime) and detection range of the infrared sensor of approximately 6-8m/18-36ft to keep you informed and safe. User-Friendly - The alarm in the receiver has a ring volume up to 100dB, 3 mode choices (Sound/LED Flash/Sound and LED Flash) and 16 songs choices Dependable Technology - Our sensor uses a state-of-the-art passive-infrared (PIR) to detect any movement of human bodies or vehicles within the detection zone. Perfect for long or hidden driveways to allow you just a little extra warning before guests (or intruders) arrive. Expandable - If you have more than one driveway or area you would like to monitor, you can expand this system with multiple sensors and receivers Power Supply - DC5V/3AAA battery can be used for the receiver, DC3V/2*AA batteries can be used for the Motion Detector, but don't use them simultaneously in case the host would be burne 　 specific

Price: 16.99 USD

Location: ShenZhen

End Time: 2024-08-01T09:26:47.000Z

Shipping Cost: 0 USD