Injen Evolution Cold Air Intake Kit for 2015-2023 Ford F-150 EcoBoost and More

Description: Injen Evolution Air Induction System***Not for Sale to California*** MANUFACTURER PART # EVO9107Fitment:2015-2023 Ford F-150 V6-2.7L EcoBoost 2015-2023 Ford F-150 V6-3.5L EcoBoost 2017-2023 Ford F-150 Raptor V6-3.5L Ecoboost 2018-2023 Ford Expedition V6-3.5L Twin Turbo 2018-2023 Lincoln Navigator V6-3.5L Twin Turbo Key Features: Dyno Proven Gains of up to 14 hp and 15 lb-ft. of torque Designed to work with the stock calibration Aggressive intake growl under acceleration Durable Roto-Molded Polyethylene housing and scoop Intake scoop is designed to capture the largest amount of cool air Reinforced automotive grade silicone couplers Fully serviceable Injen SuperNano-Web dry air filter Stainless steel band clamps with inner protective liner Aggressive under hood appearance while maintaining an OE fit Made in Pomona California, USA Injen Technology Limited Lifetime Warranty Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles. Give your 2015-2023 F-150/F-150 Raptor that added punch you crave with the EVO9107 Evolution Cold Air Intake System by Injen Technology. The EVO9107 is specifically engineered for the 2015-2023 Ford F-150/F-150 Raptor with the 2.7L/3.5L EcoBoost engine. Every EVO9107 cold air intake is made in the USA from cross linked high density polyethylene for extreme durability. No cutting or drilling required for an easy installation process that does not require aftermarket tuning for exceptional HORSEPOWER and TORQUE GAINS right out of the box!. The EVO9107 system features our 2-piece box design that incorporates our boost plenum, a massive SuperNano-Web dry air filter, built-in Filter Monitor for quick and easy filter inspections, a smooth Rotomolded induction tube for reduced restriction levels, and premium hardware. Every Injen Evolution air induction system utilizes Injen’s proprietary SuperNano-Web dry air filters. The Evolution induction systems utilize some of the largest filters on the market employing super deep filter pleats, with some measuring over 1.25”deep! This particular intake kit also features our SHUR-LOCK mounting system on the air filter to ensure a non-slip seal. The EVO9107 cold air intake system was designed to use the maximum space available under the hood to ensure optimum breathing room and extreme performance. The Evolution can’t be stopped….. Roto-molded Housing and Boost Plenum: The EVO9107 system features our 2-piece box design that incorporates our boost plenum. Designed 100% in 3D ensures a hassle free, drop-in installation – this intake system attaches directly to the original factory airbox. Forward facing ram air scoop to provide cool, fresh air to your hungry turbos! Roto-molded Intake Tube: The EVO9107 Evolution Cold Air Intake System uses a custom designed and dyno-tuned intake tube to produce huge power gains while retaining an OE quality fit. SuperNano-Web Dry Air Filter: “That’s massive!” is all you will hear about this SuperNano-Web Dry air filter that is included with the EVO9107 cold air intake system. Using the largest filter possible for this application has increased the available air volume - resulting in added power while keeping the installation process quick and simple. Quality Hardware: From the Stainless Steel Band Clamps with an inner protective liner to the reinforced automotive grade silicone coupler, every aspect is covered for a perfect and secure fit. Hassel-Free Installation: Make it easy! By designing this kit in a 3D workspace, you’re ensured a quick and easy installation that not only increases the power output of your engine, but also provides a clean and powerful look that others see every time you pop your hood. Dyno Proven: Clean and simple, NUMBERS talk! Injen has put in the time and diligence to stand behind our performance data. We put in the time to test and prove that we have developed a superior kit for your Ford F-150/F-150 Raptor. After hours of designing and dyno testing, Injen is proud to say that the EVO9107 Evolution Air Intake system puts down numbers of up to 14 additional horsepower and 15 Ft.-lbs. of torque.. Condition: 100% Brand New, Never Used or InstalledAvailability: Direct drop ship from their authorized distributor Warranty:Please inspect your order upon receipt. No damage claims will be honored after 14 days of delivery.All item we sold come with 60 days defective warranty from the dateWe will cover shipping for exchange if we shipped incorrect quantity, incorrect item or defective itemIn a case when return is requested, we require the buyer to follow standard RMA procedures by obtaining a RMA number before sending the product back to us. ***Returning an item without following proper procedures will delay the claim process, and we reserve the right to refuse any unauthorized return packages***. In some occasions we might request images as supporting document for damage/ defective claims to help us determine the best and most effective resolution toward the problem. When this happens, a designated e-mail address will be provided to the buyer so images files can be attached, as the eBay message system does not allow image attachments at the moment. Customer Services:If you have any questions before buying or after you have purchased the item, please do not hesitate to contact our customer service support team. Our office hours are Monday to Friday 10am-6pm PST , we are off during the weekends and all major holidays and you will be guaranteed that your questions will be replied promptly. Normally we can reply your email within 24hr but if you email to us during weekends, we have to reply to you on the following Monday in the order as it's received. If you have a problem about your shipment, please email us to solve it before leaving a negative feedback. Powered by SixBit's eCommerce Solution

Price: 385.95 USD

Location: Walnut, California

End Time: 2024-08-19T22:01:05.000Z

Shipping Cost: 0 USD