Etekcity Get Connected 4x1 HDMI Switch w/ IR wireless Remote, AC power

Description: This device is used ti connect up to FOUR different HDMI source devices (e.g., computers, DVD players, game boxes, VCR) to one HDMI display (one monitor). NOTE: It does not work the other way around (i.e., four monitors with one source). Please read all of the following before buying this product. FeaturesSupports HDMIPIP (Picture-in-Picture) displayUp to 297MHz TMDS for 3D supportSupports resolutions including $k x 2K (30Hz), 1080p (120Hz), and 1080p 3D (60Hz)Supports HDMI Deep Color (30, 36, 48-bit per pixel)Supports digital audio (DTS-HD, Dolby TrueHD, LPCM 7.1, Dolby AC03, DSDSpecificationsBandwidth: 2.97 GbpsHDMI Ports: 4x input, 1x outputPower Source: DC 5V 1ADimensions: 118 x 65 x 25mmWeight: 120gOperating InstructionsConnect the HDMII source device(s) to the input ports on the switcher using standard HDMI cables (not included)Connect the HDMI display to the output port on the switcher using a standard HDMI cable.Plug the DC 5V adapter into a power outlet and the switcher.Insert the battery into the remote control's battery compartment before use.NOTE: The IR wireless remote is best used within a scope of 30 degrees to the front of the switcher.Remote Control Buttons (See image)1: Select the active input to be transmitted to the display device.2: No function for this model.3: PIP; activate picture-in-picture function. SEL; select the secondary input. ENTER; activate the selected secondary input.4: No function for this model.Buttons and Lights (see image) 1: Power LED; Indicates the switcher is receiving power.2: Switch; Switches between HDMI inputs3: IR; Receives signal from remote control.4: Output; Indicates the switcher is connected to an output device.5: Input; Indicates that a source device is connected and/or activeCOLORS: Green; active. Red, connected but not active. Off; not connected.

Price: 30 USD

Location: Melbourne, Florida

End Time: 2024-12-31T14:52:43.000Z

Shipping Cost: 0 USD