CDHPOWER 2.4L Gas Motorized Bike Frame,26" Mag WHEEL and 26" Non Suspension Fork

Description: cdhpower2012 has been registered on Ebay. We are the only brand owner. We did not authorize any third party to use our pictures or brand.Please recognize cdhpower brand. CDHPOWER 26" Mag Wheel Set with 120mm Width/26 inch Magnesium Rim/Disc Brake NOTE: It's inevitable that there will be SCRATCHES or PAINT PEELING during transportation, order carefully if you are concerned.Please kindly note: Before installing, please clean the metal scrap in hub firstly; And put engine oil or lubricating oil on the axle and the six screw holes to disc brake to prevent the screw from damaging!For non-motorized bicycles, the max loading is 385 lb/175kg.For motorized bicycles, the max safty loading is 330 lb/150kg. Key Product Features26" Mag Wheel Set; FxR:100x120mm For Rotary Single Speed Flywheel; Attention: excluding 6pcs allen bolts to mag wheel (if you find 6pcs bolts of disc brake rotor on, take off and throw off for safety consider),suggest allen bolts M5x23mm. if your sprocket is thicker than standard sprocket, we suggest bolts M5x25mm. Designed mainly for motorized bicycles;do not need adapter, sprocket only needed;Put grease/lubricating oil on Thread of Wheel to prevent damage of thread from Riding. Thread size: 1.375 inch X24T;Brake Compatibility: Disc Brake; Light and very durable.the hole spacing for front disc brakes of mag wheel to be added is 44mmAxles included;Engine chain drive sprocket included; easy install sprocket on mag wheel,Please contact us firstly if the bike rims are damages from the shipping ,CDHPOWER tries best to service well. It's inevitable that there will be scratches or paint peeling during transportation, buy carefully if you are concerned. size of thread :1.375"*24Tput grease/lubricating oil on thread of wheel to prevent damage of thread from RidingFront and Rear Dropout: 100x120mm Product description 26" Mag Wheel Set F and R 100mm x120mm For Rotary Single Speed Flywheel / 26 Inch Magnesium Wheels/Black/Disc Brake - for Beach Cruisers, MTB's, and Gas Powered BicyclesAttention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this alum wheel )26" Magnesium Wheels are Designed mainly for motorized bicycles. light and very durable. 26" Size Wheel;do not need adapter, sprocket only needed; easy install sprocket on mag wheel;Designed mainly for motorized bicycles;do not need adapter, sprocket only needed;Magnesium Wheels including chain drive SprocketLight and very durable. 26"/26 inch Size Wheel;Axles included;easy install sprocket on mag wheel,Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this magnesium wheel, buyer need drill 6 holes in middle to make sprocket fit on the magnesium wheel or buyer buy our multifunctional sprocket which fits well on our magnesium wheel CDHPOWER Bicycle Gas Frame w/Gas Fuel Tank 2.4L Frame-Black,Gas Motorized Bike Key Product FeaturesNote: If buyers' bike rear wheel is with quick release,we suggest buyers do not buy the gas frame unless buyers are professional.New reinforced GT-A with disc brake mounting ports ready on the rear end of the frame;Brake system: Disc brake and V brake Gas motor with 8mm front mount bolts fits on well on the Pedestal mt of CDH gas frame! GT-A Gas Frame w/fuel tank 2.4L - Black; CDHPOWER Gas Frame 2.4L Requirement on seatpost:27.2mm, Note: buyers need know how to fasten the motor on the pedestal mount of gas frame to prevent crack from vibration which maybe caused crack of frame; Black bicycle gas frame Built-in 2.4L gas tank Designed for the 2-cycle engines 48cc/66cc/80cc with 40 to 50mm wide front mount stud spacingRear Disc brake bracket and front mount pedestal works well with gas motor front mount bolts 8mm；rear width:135mmFrame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.38mm diameter downtube 70 degrees angle V framethe width and Inner Diameter (including depth of screw) of the bottom bracket : 68mmx51.5mm/2.677inx2inBottom bracket: 51.5mm (inner diameter)&60mm (outer diameter)Required for seat post:27.2mmRequired for seat post clamp:31.8mmPLEASE NOTE 1: the best safe speed if racing: 35km/h；Head tube: 150mm; requirement on headset size:1 1/8"; bottom bracket 2" diameter; Product description - Built-in 2.4L gas tank Designed for the 2-cycle engines with 40 to 50mm wide front mount stud spacing- Frame made especially heavy duty for gas engine applications Available with 135mm rear frame width for either single speed or multi-speed bikes.- 38mm diameter downtube 70 degrees angle V frame- requirement on headset size:1 1/8"; bottom bracket 2" diameter;- Requirement on switch of gas frame: 10*1.0mm:CDHPOWER Gas Tank Petcock/Value 10x1.0mm (Fit CDH 2.4L and 3.75L Gas Frame) If you just want to bolt up and ride without messing with zip-tie's or fabricated mounts, then the 26" Motorized Bicycle Frame with fuel tank is the frame you've been looking for.Ditch that old, clunky tank- this frame's got a 2.4L gas tank built right in to it with an easy-to-use twist gas cap. The frame also cleans up your cables with cable ports running along the center and bottom of the bike, eliminating the need for ugly zip-tie's that can scratch your paint job. Brake system: Disc brake and V brakeThe 26" Motorized Bicycle Frame is a lightweight, high quality bike frame just waiting for your next build!CDHPOWER Bicycle Fork 26" - Triple Tree Non Suspension Fork w/Double Shoulder Key Product Features Triple three non suspension fork with double BLACK shoulder for motorized bikeOverall length:700mm;Inside length Max between the two Alum plates:188.5mmFork is compatible with cdhpower gas tank frames.Headset requirement is 1 1/8''PLEASE NOTE 1: the best safe speed if racing: 35km/h；Disc brake bracket ; Product features(fit well on Handle bar bicycle handle bar)TRIPLE TREE NON SUSPENSION FORK IS COMPATIBLE WITH CDHpower GAS TANK FRAMES. 26" front fork: non suspension with double shoulder; Disc brake bracket and V brake bracket;compatible with 26"*3 tire max; Headset requirement is 1 1/8'' Package includes front and back wheel with 36 teeth sprocket on the back wheel and one 2.4L black gas frame,one 26" non suspension fork with 1 1/8" headset. these item 26 inch mag whee front wheel and rear wheel set is compatible with normal bikes and motorized bikes as ellFor motorized bicycles: 26" Magnesium Wheels are Designed mainly for motorized bicycles. light and very durable.install engine chain drive sprocket with 6 holes which is compatible with disc brake pattern of wheel, do not need adapter.For normal bikes, fit on bikes with single speed flywheel.Attention: Standard 9 hole sprockets 24T to 60T in Kit do not work on this magnesium wheel, buyer need drill 6 holes to make sprocket fit on the magnesium wheel or buyer buy multifunctional sprocket which fits well on our magnesium wheelcompatible with single speed flywheel onlyAxles included; Easy intall sprocket on mag wheel,Disc brake braking systemMagnesium Wheels setup INCLUDE chain drive SprocketLight and very durable.for 26"/26 inch Size Wheel;triple three non suspension fork with double BLACK shoulder for motorized bike fork is compatible with cdhpower gas tank frames.Overall length:700mm;Inside length Max between the two Alum plates:188.5mmfork is compatible with cdhpower gas tank frames.center hole to center hole: 50mm triple three non suspension fork with double BLACK shoulder for motorized bike Shipping:Shipping is FREE to all addresses other than Alaska/Hawaii,APO/PO boxes .We ship FAST - We will ship the product on the second business day.We work with all major shipping companies (UPS, USPS, FedEx etc.) and provide TRACKING NUMBER to ALL orders.Please ensure that the address is verified and correct during checkout.We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control. PaymentWe accept payment via PayPal only.We will ship the item as soon as payment is cleared on PayPal. ReturnsWe stand behind our products. We offer a 30 Days Return Policy on items which you are not completely satisfied with.Returns are gladly accepted if it is in the original condition, including all manuals and accessories.You have the option for a full refund or an exchange of the item (subjected to stock availability).When sending in a return, please note that it can take up to 7 business days for the return to be processed. FEEDBACK:We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.It is impossible to address issues if we do not know about them! CONTACT_US:For helping with your order or if you have any questions regarding our products, please contact us through eBay's internal message system. All messages are answered within 24-48 hours. We will do our best to resolve the issue.Looking forward hearing from you, CDHPOWER Support Team. Thank you for looking, if you have any questions, feel free to ask and I will do my best to get back to you promptly!Products usually shipped on the second business day and you will receive message of tracking ID.CDHPOWER is registered officially in year 2012 and started business in year 2008, we can provide engine kits, high performance spare parts of engine, motorized bicycle and spare parts of bike.

Price: 398.66 USD

Location: CA

End Time: 2025-02-04T07:51:24.000Z

Shipping Cost: 0 USD